<![CDATA[New Products from Main Website Store]]> http://walcks4wd.com/rss/catalog/new/store_id/1/ Thu, 17 May 2012 06:26:04 +0000 Zend_Feed en_US http://blogs.law.harvard.edu/tech/rss <![CDATA[TightSteer© Sector Shaft Tensioner 7/16-20 Threads MB, GPW, CJ (Up To 1966), DJ, And 1946-1953 Pick Up Truck, Station Wagon, Sedan Delivery Models]]> http://walcks4wd.com/tight-steer-sector-shaft-tensioner-mb-gpw-cj-up-to-1966-dj-2wd-station-wagon-sedan-delivery-models.html

This is the TightSteer© sector shaft tension device to keep the sector shaft pushed into the worm shaft at all times. The device has a spring loaded button that pushed on the sector shaft in place of your adjustment screw. Nice product for Ross steering boxes. This Tight Steer© has 7/16-20 threads.

Fits all models listed below. On Pick Up Truck, Station Wagon and Sedan Delivery models up to 1953 use this Tight Steer© for 1954-1963 models with the larger box, choose TightSteer© model 200.)


Specifications:
Body: 3/4" by 1 1/2", Steel: 1144, Spring Load: 90lbs, Pressure Pin: Tempered Steel.

Cautionary Note: TightSteer© cannot compensate for worn wheel bearings, worn king pins or king pin bearings, worn pitman arms or pitman arm bearings, improperly set camber, improperly set caster, improperly set toe-in, or worn tie rod ends. Ensure that these components and settings are correct before installing TightSteer©.

1 Required per Jeep

Carl Walck Explains the Benefit of Using TightSteer

]]>
Thu, 17 May 2012 06:26:04 +0000
<![CDATA[TightSteer© Sector Shaft Tensioner 1/2-20 Threads M38, M38A1, 1954-1963 Pick Up Truck, Station Wagon, Sedan Delivery and 1966-1971 CJ5, CJ6]]> http://walcks4wd.com/tight-steer-sector-shaft-tensioner-1-2-20-threads-m38-m38a1-pick-up-truck-station-wagon-sedan-delivery.html

This is the TightSteer© sector shaft tension device to keep the sector shaft pushed into the worm shaft at all times. The device has a spring loaded button that pushed on the sector shaft in place of your adjustment screw. Nice product for Ross steering boxes. This TightSteer© has 1/2-20 threads.

Fits all models listed below. (Special note on Pre 1954 Pick Up TruckStation Wagon and Sedan Delivery models: TightSteer© model 200 only fits 1954 and later Pick Up Truck, Station Wagon and Sedan Delivery models for ealier models choose TightSteer© model 100.)


Specifications:
Body: 3/4" by 1 1/2", Steel: 1144, Spring Load: 90lbs, Pressure Pin: Tempered Steel.

Cautionary Note: TightSteer© cannot compensate for worn wheel bearings, worn king pins or king pin bearings, worn pitman arms or pitman arm bearings, improperly set camber, improperly set caster, improperly set toe-in, or worn tie rod ends. Ensure that these components and settings are correct before installing TightSteer©.

1 Required per Jeep

Carl Walck Explains the Benefit of Using TightSteer

]]>
Thu, 17 May 2012 06:26:04 +0000